Pressure Switch Series 605
differential, factory-calibrated
|
|
|
|
Metric
|
US standard
|
| Pressure range |
20 - 400 Pa |
0.08" - 1.6"
W.C. |
| Maximum over-pressure |
5 kPa |
20" W.C. |
| Lowest MAKE point (diaphragm vertical) |
20 Pa |
0.08" |
| Differential |
Factory calibrated to
customer specifications
|
| Smallest differential @ lowest MAKE |
8 Pa |
0.032" |
| Tolerance at lowest set point |
+/- 3 Pa |
+/- 0.012" |
| Tolerance at highest set point (220 Pa model) |
+/- 7 Pa |
+/- 0.028" |
| Tolerance at highest set point (400 Pa model) |
+/- 14 Pa |
+/- 0.056" |
|
Repeatability of calibrated set point (220
Pa model)
|
<+/- 1 Pa |
<+/- 0.004" W.C. |
| Repeatability of calibrated set point (400
Pa model) |
<+/- 2 Pa |
<+/- 0.008" W.C |
| Temperature range. medium (air) |
-30...+ 85õC |
-22 ... 185õF |
| Temperature, storage (protection class II) |
-30...+ 85õC |
-22 ... 185õF |
| Installation |
any position (customer
to specify position before factory calibration)
|
| Installation for MAKE below 30 Pa (0.12") |
vertical or horizontal
with contacts pointing down
|
| Diaphragm |
silicone (LSR) |
| Electrical connections |
AMP 6.3 mm x 0.8 or
4.8 mm x 0.8
|
AMP 1/4" or 3/16" |
| Contacts |
SPDT, self cleaning
contacts
|
| Electrical rating, pilot duty |
0.2 A / 30
VAC |
| Electrical rating, load carrying |
1 res. (0.5A
Ind.) @ 250 VAC |
| Mounting methods
|
|
| 1) with screws
directly to sheet metal |
| 2) with snap-in
ring |
| 3) with L-bracket |
| 4) with strap
bracket |
| 5) with snap-in
ring and bracket |
| Service life |
1 million cycles |
| Dimensions diameter x height(incl. contacts) |
80.8 mm x 46.5 mm |
3.18" x 1.83" |
| Weight |
57 g |
2 oz. |
| Standard packaging, box |
300 pcs |
| Standard packaging, skid |
1,200 pcs |
| Approvals |
DIN/DVGW Reg. No.96.01e513
DIN/VDE 0630 Reg No. 2421 |
UL 1054, ETL Reg. # 9801715
CSA C22.2No.55
|
| Additional info: |
|
| Disclaimer |
This is a sales document. All specifications
to be confirmed by Huba engineering
|
|
|
